top of page
A beautiful background including engineering devices and vascular systems using blue_purpl

Publications

ARCHIVAL PAPERS CRITICALLY REVIEWED BEFORE PUBLICATION

(* denotes supervised trainee)​

​

  1. Roby, M.*, Restrepo, J.C.*, Park, H.*, Muluk, S.C., Eskandari, M.K., Baek, S., and Finol, E.A., 2025, “Automatic Segmentation of Abdominal Aortic Aneurysm from Computed Tomography Angiography Using a Patch-based Dilated U-Net Model,” IEEE Access, Vol. 13, pp. 24544-24554, https://doi.org/ 10.1109/ACCESS.2025.3533417.

  2. Reyna, V.*, Fathesami, N.*, Wu, W.*, Muluk, S.C., De Oliveira, V., and Finol, E.A., 2025, “On the relative effects of wall and intraluminal thrombus constitutive material properties in abdominal aortic aneurysm wall stress,” Cardiovascular Engineering and Technology, Vol. 16, No. 1, pp. 66-78, https://doi.org/10.1007/s13239-024-00757-8.

  3. Berman, A.G., Romary, D.J., Kerr, K.E., Gorazd, N.E., Wigand, M.M., Patnaik, S.S.*, Finol, E.A., Cox, A.D., and Goergen, C.J., 2022, “Experimental aortic aneurysm severity and growth depend on topical elastase concentration and lysyl oxidase inhibition,” Scientific Reports, Vol. 12, Article No. 99. https://doi.org/10.1038/s41598-021-04089-8.

  4. Pillalamarri, N.R.*, Piskin, S.*, Patnaik, S.S.*, Murali, S., and Finol, E.A., 2021, “Patient-specific computational analysis of hemodynamics in adult pulmonary hypertension,” Annals of Biomedical Engineering, Vol. 49, No. 12, pp. 3465–3480. https://doi.org/ 10.1007/s10439-021-02884-y.

  5. Rengarajan, B.*, Patnaik, S.S.*, and Finol, E.A., 2021, “A predictive analysis of wall stress in abdominal aortic aneurysms using a neural network model,” Journal of Biomechanical Engineering, Vol. 143, No. 12, Article No. 121004. https://doi.org/10.1115/1.4051905.

  6. Arnold, F.*, Muzzio, N., Patnaik, S.S.*, Finol, E.A., and Romero, G., 2021, “Pentagalloyl glucose-laden poly(lactide-co-glycolide) nanoparticles for the biomechanical extracellular matrix stabilization of an in vitro abdominal aortic aneurysm model,” ACS Applied Materials & Interfaces, Vol. 13, No. 22, pp. 25771-25782. https://doi.org/10.1021/acsami.1c05344.

  7. Bordones-Crom, A.*, Patnaik, S.S.*, Menon, P.G., Murali, S., and Finol, E.A., 2021, “Morphological analysis of the right ventricular endocardial wall in pulmonary hypertension,” Journal of Biomechanical Engineering, Vol. 143, No. 7, Article No. 074504. https://doi.org/10.1115/1.4050457.

  8. Amigo, N.*, Valencia, A., Wu, W.*, Patnaik, S.*, Finol, E., 2021, “Cerebral aneurysm rupture risk assessment using statistical methods and machine learning classifiers,” Journal of Engineering in Medicine, Vol. 235, No. 6, pp. 665-662. https://doi.org/10.1177/09544119211000477.

  9. Thirugnanasambandam, M.*, Canchi, T.*, Piskin, S.*, Karmonik, C., Kung, E., Menon, P.G., Avril, S., and Finol, E.A., 2021, “Design, development and temporal evaluation of an MRI-compatible in-vitro circulation model using a compliant AAA phantom,” Journal of Biomechanical Engineering, Vol. 143, No. 5, Article No. 051004. https://doi.org/ 10.1115/1.4049894.

  10. Sharzehee, M., Seddighi, Y., Sprague, E.A., Finol, E.A., and Han, H.-C., 2021, “A hemodynamic comparison of myocardial bridging and coronary atherosclerotic stenosis: a computational model with experimental evaluation,” Journal of Biomechanical Engineering, Vol. 143, No 3, Article No. 031013. https://doi. org/10.1115/1.4049221.

  11. Anderson, J.L., Niedert, E.E., Patnaik, S.S.*, Tang, R., Holloway, R.L., Osteguin, V.*, Finol, E.A., and Goergen, C.J., 2021, “Animal model dependent response to pentagalloyl glucose in murine abdominal aortic injury,” Journal of Clinical Medicine, Vol. 10, No. 2, Article No. 219. https://doi.org/10.3390/ jcm10020219.

  12. Pillalamarri, N.R.*, Patnaik, S.S.*, Piskin, S.*, Gueldner, P.*, and Finol, E.A., 2021, “Ex vivo regional mechanical characterization of porcine pulmonary arteries,” Experimental Mechanics, Vol.  61, No. 1, pp. 285–303. https://doi. org/10.1007/s11340-020-00678-2.

  13. Canchi, T.*, Patnaik, S.S.*, Nguyen, H.N., Ng, E.Y.K., Narayanan, S., Muluk, S.C., De Oliveira, V., and Finol, E.A., 2020, “A comparative study of biomechanical and geometrical attributes of abdominal aortic aneurysms in the Asian and Caucasian populations,” Journal of Biomechanical Engineering, Vol. 142, No. 6, Article No. 061003 {10 pages}. https://doi.org/10. 1115/1.4045268.

  14. Acosta, C., Bhalla, A., Guo, R., Yanes, D., Finol, E.A., and Frank, J. 2020, “Numerical and experimental study of the glass-transition temperature of a non-Newtonian fluid in a dynamic scraped surface heat exchanger,” International Journal of Heat and Mass Transfer, Vol. 152, No. 5, Article No. 119525 {8 pages}. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119525.

  15. Rengarajan, B.*, Wu, W.*, Wiedner, C., Ko, D., Muluk, S.C., Eskandari, M.K., Menon, P.G., and Finol, E.A., 2020, “A comparative classification analysis of abdominal aortic aneurysms by machine learning methods,” Annals of Biomedical Engineering, Vol. 48, No. 4, pp. 1419–1429. https://doi.org/10.1007/s10439-020-02461-9. {cover illustration for the April issue of Annals of Biomedical Engineering}

  16. Piskin, S.*, Patnaik, S.S.*, Han, D., Bordones, A.*, Murali, S., and Finol, E.A., 2020, “A canonical correlation analysis of the relationship between clinical attributes and patient-specific hemodynamic indices in adult pulmonary hypertension,” Medical Engineering and Physics, Vol. 77, pp. 1-9. https://doi.org/10.1016/j. medengphy.2020.01.006.

  17. Berg, P., Voß, S., Saalfeld, S., Janiga, G., Bergersen, A.W., Valen-Sendstad, K., Bruening, J., Goubergrits, L., Spuler, A., Chiu, T.L., Tsang, A.C.O., Chung, B.J., Copelli, G., Csippa, B., Paál, G., Závodszky, G., Detmer, F.J., Chung, B.J., Cebral, J.R., Fujimura, S., Takao, H., Karmonik, C., Elias, S., Cancelliere, N.M., Najafi, M., Steinman, D.A., Pereira, V.M., Piskin, S.*, Finol, E.A., Pravdivtseva, M., Velvaluri, P., Rajabzadeh-Oghaz, H., Paliwal, N., Meng, H., Seshadhri, S., Venguru, S., Shojima, M., Sindeev, S., Frolov, S., Qian, Y., Wu, Y.A., Carlson, K.D., Kallmes, D.F., Dragomir-Daescu, D., Beuing, O., 2019, “Multiple Aneurysms AnaTomy CHallenge 2018 (MATCH) ‒ phase II: rupture risk assessment,” International Journal of Computer Assisted Radiology and Surgery, Vol. 14, No. 10, pp. 1795–1804. https://doi.org/10.1007/s11548-019-01986-2.

  18. Fatemifar, F., Feldman, M.D., Clarke, G.D., Finol, E.A., Han, H.-C., 2019, “Computational modeling of human left ventricle to assess the effects of trabeculae carneae on the diastolic and systolic functions,” Journal of Biomechanical Engineering, Vol. 141, No. 9, Article No. 091014 {10 pages}. https://doi.org/ 10.1115/1.4043831.

  19. Patnaik, S.S.*, Piskin, S.*, Pillalamarri, N.R.*, Romero, G., Escobar, G.P., Sprague, E., Finol, E.A., 2019, “Biomechanical restoration potential of pentagalloyl glucose after arterial extracellular matrix degeneration,” Bioengineering, Vol. 6, No. 3, Article No. 58 {18 pages}. https://doi.org/10.3390/ bioengineering6030058. {cover illustration for Special Issue Advances in Biological Tissue Biomechanics}

  20. Wu, W.*, Rengarajan, B.*, Thirugnanasambandam, M.*, Parikh, S.A.*, Gomez, R.*, De Oliveira, V., Muluk, S.C., and Finol, E.A., 2019, “Wall stress and geometry measures in electively repaired abdominal aortic aneurysms,” Annals of Biomedical Engineering, Vol. 47, No. 7, pp. 1611–1625. https://doi.org/10.1007/s10439-019-02261-w.

  21. Kong, F., Kheyfets, V.*, Finol, E., and Cai, X.-C., 2019, “Simulation of unsteady blood flows in a patient-specific compliant pulmonary artery with a highly parallel monolithically coupled fluid-structure interaction algorithm,” International Journal of Numerical Methods in Biomedical Engineering, Vol. 35, Article No. e3208 {24 pages}. https://doi.org/10.1002/cnm.3208.

  22. Patnaik, S.S.*, Simionescu, D.T., Goergen, C.J., Hoyt, K., Sirsi, S., and Finol, E.A., 2019, “Pentagalloyl glucose and its functional role in vascular health: biomechanics and drug-delivery characteristics,” Annals of Biomedical Engineering, Vol. 47, No. 1, pp. 39-59. https://doi.org/10.1007/s10439-018-02145-5.

  23. Berg, P., Voß, S., Saalfeld, S., Janiga, G., Bergersen, A.W., Valen-Sendstad, K., Bruening, J., Goubergrits, L., Spuler, A., Cancelliere, N.M., Steinman, D.A., Pereira, V.M., Chiu, T.L., Tsang, A.C.O., Chung, B.J., Cebral, J.R., Cito, S., Pallarès, J., Copelli, G., Csippa, B., Paál, G., Fujimura, S., Takao, H., Hodis, S., Hille, G., Karmonik, C., Elias, S., Kellermann, K., Khan, M.O., Marsden, A.L., Morales, H.G., Piskin, S.*, Finol, E.A., Pravdivtseva, M., Rajabzadeh-Oghaz, H., Paliwal, N., Meng, H., Seshadhri, S., Howard, M., Shojima, M., Sugiyama, S.I., Niizuma, K., Sindeev, S., Frolov, S., Wagner, T., Brawanski, A., Qian, Y., Wu, Y.A., Carlson, K.D., Dragomir-Daescu, D., and Beuing, O., 2018, “Multiple Aneurysms AnaTomy CHallenge 2018 (MATCH) ‒ Phase I: Segmentation,” Cardiovascular Engineering and Technology, Vol. 9, No. 4, pp. 565-581. https://doi.org/10.1007/s13239-018-00376-0.

  24. Parikh, S.A.*, Gomez, R.*, Thirugnanasambandam, M.*, Chauhan, S.S.*, De Oliveira, V., Muluk, S.C., Eskandari, M.K., and Finol, E.A., 2018, “Decision tree based classification of abdominal aortic aneurysms using geometry quantification measures,” Annals of Biomedical Engineering, Vol. 46, No. 12, pp. 2135–2147. https://doi.org/10.1007/s10439-018-02116-w.

  25. Canchi, T.*, Ng, E.Y.K., Narayanan, S., and Finol, E.A., 2018, “On the assessment of abdominal aortic aneurysm rupture risk in the Asian population based on geometric attributes,” Journal of Engineering in Medicine, Vol. 232, No. 9, pp. 922-929. https://doi.org/10.1177/0954411918794724.

  26. Urrutia, J.*, Roy, A., Antón, R., Raut, S.S.*, Muluk, S.C., and Finol, E.A., 2018, “Geometric surrogates of abdominal aortic aneurysm wall mechanics”, Medical Engineering and Physics, Vol. 59, pp. 43-49. https://doi.org/10.1016/j.medengphy.2018.06.007.

  27. Bordones, A.D.*, Leroux, M.*, Kheyfets, V.O.*, Wu, Y.-A., Chen, C.-Y., and Finol, E.A., 2018, “Computational fluid dynamics modeling of the human pulmonary arteries with experimental validation,” Annals of Biomedical Engineering, Vol. 46, No. 9, pp. 1309-1324. https://doi.org/10.1007/s10439-018-2047-1.

  28. Thirugnanasambandam, M.*, Simionescu, D., Escobar, P.G., Sprague, E., Goins, B., Clarke, G.D., Han, H.-C., Amezcua, K.H.*, Adeyinka, O.R.*, Goergen, C.J., and Finol, E.A., 2018, “The effect of pentagalloyl glucose on the wall mechanics and inflammatory activity of rat abdominal aortic aneurysms,” Journal of Biomechanical Engineering, Vol. 140, No. 8, Article No. 084502 {9 pages}. https://doi.org/10.1115/1.4040398.

  29. Kong, F., Kheyfets, V.*, Finol, E., and Cai, X.-C., 2018, “An efficient parallel simulation of unsteady blood flows in patient-specific pulmonary artery,” International Journal of Numerical Methods in Biomedical Engineering, Vol. 34, Article No. e2952 {22 pages}. https://doi.org/10.1002/cnm.2952.

  30. Muluk, S.L., Muluk, P.D., Shum, J.*, and Finol, E.A., 2017, “On the use of geometric modeling to predict aortic aneurysm rupture,” Annals of Vascular Surgery, Vol. 44, pp. 190-196. https://doi.org/10.1016/ j.avsg.2017.05.014.

  31. Chauhan, S.S.*, Gutierrez, C.A.*, Thirugnanasambandam, M.*, De Oliveira, V., Muluk, S.C., Eskandari, M.K., and Finol, E.A., 2017, “The association between geometry and wall stress in emergently repaired abdominal aortic aneurysms,” Annals of Biomedical Engineering, Vol. 45, No. 8, pp. 1908-1916. https://doi.org/10.1007/s10439-017-1837-1.

  32. Ruiz de Galarreta, S.*, Cazón, A., Antón, R., and Finol, E.A., 2017, “The relationship between surface curvature and abdominal aortic aneurysm wall stress,” Journal of Biomechanical Engineering, Vol. 139, No. 8, Article No. 081006 {7 pages}. https://doi.org/10.1115/1.4036826.

  33. Ruiz de Galarreta, S.*, Antón, R., Cazón, A., and Finol, E.A., 2017, “A methodology for developing anisotropic AAA phantoms via additive manufacturing,” Journal of Biomechanics, Vol. 57, pp. 161-166. https://doi.org/10.1016/j.jbiomech.2017.04.001.

  34. Ruiz de Galarreta, S.*, Antón, R., Cazón, A., and Finol, E.A., 2017, “A methodology for verifying abdominal aortic aneurysm wall stress,” Journal of Biomechanical Engineering, Vol. 139, No. 1, Article No. 011006 {9 pages}. https://doi.org/10.1115/1.4034710.

  35. Muluk, S.L., Muluk, P.D., Shum, J.*, and Finol, E.A., 2016, “On the use of geometric modeling to predict aortic aneurysm rupture,” Clinics in Surgery, Vol. 1, Article No. 1252 {6 pages}.

  36. Ruiz de Galarreta, S.*, Antón, R., Cazón, A., Larraona, G.S., and Finol, E.A., 2016, “Anisotropic abdominal aortic aneurysm replicas with biaxial material characterization,” Medical Engineering & Physics, Vol. 38, No. 12, pp. 1505-1512. https://doi.org/10.1016/j.medengphy.2016.09.010.

  37. Perez E.*, Rojas-Solorzano L., and Finol E.A., 2016, “Geometric predictors of abdominal aortic aneurysm maximum wall stress,” Chemical Engineering Transactions, Vol. 49, pp. 73-78. https://doi.org/10.3303/ CET1649013.

  38. Chandra, S.C.*, Vimalatharmaiyah, R.*, Riveros, F., Rodriguez, J.F., and Finol, E.A., 2016, “A methodology for the derivation of unloaded abdominal aortic aneurysm geometry with experimental validation,” Journal of Biomechanical Engineering, Vol. 138, No. 10, Article No. 101005 {11 pages}. https://doi.org/ 10.1115/1.4034425.

  39. Aramburu, J.*, Antón, R., Borro, D., Rivas, A., Larraona, G.S., Ramos, J.C., and Finol, E.A., 2016, “A methodology for assessing local bifurcated blood vessel shape variations,” Biomedical Physics & Engineering Express, Vol. 2, 015001 {10 pages}. https://doi.org/10.1088/2057-1976/2/1/015001.

  40. Raut, S.S.*, Liu, P.*, and Finol, E.A., 2015, “An approach for patient-specific multi-domain vascular mesh generation featuring spatially varying wall thickness modeling,“ Journal of Biomechanics, Vol. 48, No. 10, pp. 1972-1981. https://doi.org/10.1016/j.jbiomech.2015.04.006.

  41. Kheyfets, V.O.*, Rios, L.*, Smith, T., Schroeder, T., Mueller, J., Murali, S., Lasorda, D., Zikos, A., Spotti, J., Reilly Jr., J.J., and Finol, E.A., 2015, “Patient-specific computational modeling of blood flow in the pulmonary arterial circulation,” Computer Methods and Programs in Biomedicine, Vol. 120, No. 2, pp. 88-101. https://doi.org/10.1016/j.cmpb.2015.04.005.

  42. Kheyfets, V.O.*, Thirugnanasambandam, M.*, Rios, L.*, Evans, D.*, Smith, T., Schroeder, T., Mueller, J., Murali, S., Lasorda, D., Spotti, J., and Finol, E.A., 2015, “The role of wall shear stress in the assessment of right ventricle hydraulic workload,” Pulmonary Circulation, Vol. 5, No. 1, pp. 90-100. https://doi.org/10.1086/679703. {cover illustration}

  43. Satriano A., Rivolo, S., Finol, E.A., Di Martino, E.S., 2015, “In-vivo strain assessment of the abdominal aortic aneurysm,” Journal of Biomechanics, Vol. 48, No. 2, pp. 354–360. https://doi.org/10.1016/ j.jbiomech.2014.11.016. {cover illustration}

  44. Anton, R.*, Chen, C.-Y., Hung, M.-Y., Finol, E.A., and Pekkan, K., 2015, “Experimental and computational investigation of patient-specific abdominal aortic aneurysm pressure field with and without intraluminal thrombus,” Computer Methods in Biomechanics and Biomedical Engineering, Vol. 8, No. 9, pp. 981-992. https://doi.org/10.1080/10255842.2013.865024.

  45. Sohrabi, S., Zheng, J., Finol, E.A., and Liu, Y., 2014, “Numerical simulation of particle transport and deposition in the pulmonary vasculature,” Journal of Biomechanical Engineering, Vol. 136, No. 12, 121010 {11 pages}. https://doi.org/10.1115/1.4028800.

  46. Kheyfets, V.O.*, Thornton, R.*, Kowal, M.*, and Finol, E.A., 2014, “A protocol for measuring pull-off stress of wound-treatment polymers,” Journal of Biomechanical Engineering, Vol. 136, No. 7, Article No. 074501 {5 pages}. https://doi.org/10.1115/1.4027412.

  47. Malve, M.*, Chandra, S.*, Garcia, A., Mena, A., Martinez, M.A., Finol, E.A., and Doblare, M., 2014, “Impedance-based outflow boundary conditions for human carotid haemodynamics,” Computer Methods in Biomechanics and Biomedical Engineering, Vol. 17, No. 11, pp. 1248-1260. https://doi.org/10.1080/ 10255842.2012.744396.

  48. Chen, C.-Y., Anton, R.*, Hung, M.-Y., Menon, P.G., Patrick, M.J., Finol, E.A., and Pekkan, K., 2014, “Effect of intraluminal thrombus on patient-specific abdominal aortic aneurysm hemodynamics via stereoscopic PIV and CFD modeling,” Journal of Biomechanical Engineering, Vol. 136, No. 3, Article No. 031001 {9 pages}. https://doi.org/10.1115/ 1.4026160.

  49. Cornejo, S.L.*, Guzman, A.M., Valencia, A.A., Rodriguez, J.F., and Finol, E.A., 2014, “Flow-induced wall mechanics of patient-specific aneurysmal cerebral arteries: nonlinear isotropic vs. anisotropic wall stress,” Journal of Engineering in Medicine, Vol. 228, No. 1, pp. 37-48. https://doi.org/10.1177/0954411913512283.

  50. Ruiz de Galarreta, S.*, Cazón, A., Antón, R., and Finol, E.A., 2014, “Abdominal aortic aneurysm: from clinical imaging to realistic replicas,” Journal of Biomechanical Engineering, Vol. 136, No. 1, Article No. 014502 {5 pages}. https://doi.org/10.1115/1.4025883.

  51. Evani, S.J., Prabhu, R.G., Vimalatharmaiyah, R.*, Finol, E.A., and Ramasubramanian, A.K., 2013, “Monocytes mediate metastatic breast tumor cell adhesion to endothelium under flow,” The Journal of the Federation of American Societies for Experimental Biology, Vol. 27, No. 8, pp. 3017-3029. https://doi.org/10.1096/fj.12-224824.

  52. Zhang, H.*, Kheyfets, V.O.*, and Finol, E.A., 2013, “Robust abdominal aortic aneurysm lumen centerline detection for rupture status classification,” Medical Engineering and Physics, Vol. 35, No. 9, pp. 1358-1367. https://doi.org/10.1016/j.medengphy.2013.03.005.

  53. Raut, S.*, Jana, A., De Oliveira, V., Muluk, S.C., and Finol, E.A., 2013, “The importance of patient-specific regionally varying wall thickness in abdominal aortic aneurysm biomechanics,” Journal of Biomechanical Engineering, Vol. 135, No. 8, Article No. 081010 {10 pages}. https://doi.org/10.1115/1.4024578.

  54. Chandra, S.C.*, Raut, S.S.*, Jana, A., Biederman, R.W., Doyle, M., Muluk, S.C., and Finol, E.A., 2013, “Fluid structure interaction modeling of abdominal aortic aneurysms: the impact of patient specific inflow conditions and fluid/solid coupling,” Journal of Biomechanical Engineering, Vol. 135, No. 8, Article No. 081001 {14 pages}. https://doi.org/10.1115/1.4024275.

  55. Finol, E.A., Di Martino, E.S., and Baek, S., 2013, “Cardiovascular biomechanics and biofluids: a special issue with a focus on modeling of cardiovascular structures,” Annals of Biomedical Engineering, Vol. 41, No. 7, pp. 1309-1310. https://doi.org/10.1007/s10439-013-0830-6.

  56. Raut, S.*, Chandra, S.*, Shum, J.*, and Finol, E.A., 2013, “The role of geometric and biomechanical factors in abdominal aortic aneurysm rupture risk assessment,” Annals of Biomedical Engineering, Vol. 41, No. 7, pp. 1459-1477. https://doi.org/10.1007/s10439-013-0786-6.

  57. Kheyfets, V.O.*, O’Dell, W., Smith, T., Reilly Jr. J.J., and Finol, E.A., 2013, “Computational hemodynamics of the pulmonary circulation – a focus on pulmonary hypertension,” Journal of Biomechanical Engineering, Vol. 135, No. 6, Article No. 061011 {15 pages}. https://doi.org/10.1115/1.4024141.

  58. Raut, S*., Chandra, S.*, Shum, J.*, Washington, C.B.*, Muluk, S.C., Finol, E.A., and Rodriguez, J.F., 2013, “Biological, geometric and biomechanical factors influencing abdominal aortic aneurysm rupture risk: a comprehensive review,” Recent Patents on Medical Imaging, Vol. 3, No. 1, pp. 44-59. https://doi.org/10.2174/1877613211303010006.

  59. Riveros, F., Chandra, S.C.*, Finol, E.A., Gasser, T.C., and Rodriguez, J.F., 2013, “A pull-back algorithm to determine the unloaded vascular geometry in anisotropic hyperelastic AAA passive mechanics,” Annals of Biomedical Engineering, Vol. 41, No. 4, pp. 694–708. https://doi.org/10.1007/s10439-012-0712-3.

  60. Lee, K.*, Zhu, J.*, Shum, J.*, Zhang, Y., Muluk, S.C., Chandra, A., Eskandari, M.K., and Finol, E.A., 2013, “Surface curvature as a classifier of abdominal aortic aneurysms: a comparative analysis,” Annals of Biomedical Engineering, Vol. 41, No. 3, pp. 562-576. https://doi.org/10.1007/s10439-012-0691-4.

  61. Steinman, D.A., Hoi, Y., Fahy, P., Morris, L., Walsh, M.T., Aristokleous, N., Anayiotos, A., Papaharilaou, Y., Arzani, A., Shadden, S., Berg, P., Janiga, G., Bols, J., Segers, P., Bressloff, N.W., Cibis, M., Gijsen, F.H., Cito, S., Pallarés, J., Browne, L.D., Costelloe, J.A., Lynch, A.G., Degroote, J., Vierendeels, J., Fu, W., Qiao, A., Hodis, S., Kallmes, D.F., Kalsi, H., Long, Q., Kheyfets, V.O.*, Finol, E.A., Kono, K., Malek, A.M., Lauric, A., Menon, P.G., Pekkan, K., Moghadam, M.E., Marsden, A.L., Oshima, M., Katagiri, K., Peiffer, V., Mohamied, Y., Sherwin, S.J., Schaller, J., Goubergrits, L., Usera, G., Mendina, M., Valen-Sendstad, K., Habets, D.F., Xiang, J., Meng, H., Yu, Y., Karniadakis, G.E., Shaffer, N., and Loth, F., 2013, “Variability of CFD solutions for pressure and flow in a giant aneurysm: the SBC2012 CFD challenge,” Journal of Biomechanical Engineering, Vol. 135, No. 2, Article No. 021016 {13 pages}. https://doi.org/10.1115/1.4023382.

  62. Malve, M.*, Chandra, S.*, Lopez-Villalobos, J.L., Finol, E.A., Ginel, A., and Doblare, M., 2013, “CFD analysis of the human airways under impedance-based boundary conditions: application to healthy, diseased and stented trachea,” Computer Methods in Biomechanics and Biomedical Engineering, Vol. 16, No. 2, pp. 198-216. https://doi.org/10.1080/10255842.2011.615743.

  63. Loghmanpour, N.A.*, Siewiorek, G.M.*, Wannamaker, K.M., Muluk, S.C., Chaer, R., Wholey, M.H., and Finol, E.A., 2013, “Assessing the impact of distal protection filter design characteristics on 30-day outcomes of carotid artery stenting procedures,” Journal of Vascular Surgery, Vol. 57, No. 2, pp. 309-317. https://doi.org/10.1016/j.jvs.2012.08.113.

  64. Siewiorek, G.M.*, Loghmanpour, N.A.*, Winston, B.M., Wholey, M.H., and Finol, E.A., 2012, “Reproducibility of IVUS border detection for carotid atherosclerotic plaque assessment,” Medical Engineering and Physics, Vol. 34, No. 6, pp. 702–708. https://doi.org/10.1016/j.medengphy.2011.09.013.

  65. Siewiorek, G.M.*, Wholey, M.H., and Finol, E.A., 2012, “A comparative analysis of bench-top performance assessment of distal protection filters in transient flow conditions,” Journal of Endovascular Therapy, Vol. 19, No. 2, pp. 249–260. https://doi.org/10.1583/11-3720.1.

  66. Washington, C.B.*, Shum, J.*, Muluk, S.C., and Finol, E.A., 2011, “The association of wall mechanics and morphology: a case study of abdominal aortic aneurysm growth,” Journal of Biomechanical Engineering, Vol. 133, No. 10, Article No. 104501 {6 pages}. https://doi.org/10.1115/1.4005176.

  67. Winston, B.M., Siewiorek, G.M.*, Finol, E.A., and Wholey, M.H., 2011, “A case series of virtual histology intravascular ultrasound in carotid artery stenting,” Vascular Disease Management, Vol. 8, No. 8, pp. E144-E150.

  68. Malve, M.*, Perez del Palomar, A., Chandra, S.*, Lopez-Villalobos, J.L., Finol, E.A., Ginel, A., and Doblare, M., 2011, “FSI analysis of a human trachea before and after prosthesis implantation,” Journal of Biomechanical Engineering, Vo. 133, No. 7, Article No. 071003 {12 pages}. https://doi.org/10.1115/1.4004315.

  69. Basciano, C., Kleinstreuer, C., Hyun, S., and Finol, E.A., 2011, “A relation between near-wall particle-hemodynamics and onset of thrombus formation in abdominal aortic aneurysms,” Annals of Biomedical Engineering, Vol. 39, No. 7, pp. 2010-2026. https://doi.org/10.1007/s10439-011-0285-6.

  70. Siewiorek, G.M.*, Krafty, R.T., Wholey, M.H., and Finol, E.A., 2011, “The association of clinical variables and filter design with carotid artery stenting outcome,” European Journal of Vascular and Endovascular Surgery, Vol. 42, No. 3, pp. 282-291. https://doi.org/10.1016/j.ejvs.2011.04.006.

  71. Malve, M.*, Perez del Palomar, A., Chandra, S.*, Mena, A., Lopez-Villalobos, J.L., Finol, E.A., Ginel, A., and Doblare, M., 2011, “FSI analysis of a healthy and a stenotic human trachea under impedance-based boundary conditions,” Journal of Biomechanical Engineering, Vol. 133, No. 2, 021001 {12 pages}. https://doi.org/10.1115/1.4003130.

  72. Shum, J.*, Martufi, G.*, Di Martino, E.S., Washington, C.B.*, Grisafi, J., Muluk, S.C., and Finol, E.A., 2011, “Quantitative assessment of abdominal aortic aneurysm geometry,” Annals of Biomedical Engineering, Vol. 39, No. 1, pp. 277-286. https://doi.org/10.1007/s10439-010-0175-3.

  73. Shum, J.*, Xu, A.*, Chatnuntawech, I.*, and Finol, E.A., 2011, “A framework for the automatic generation of surface topologies for abdominal aortic aneurysm models,” Annals of Biomedical Engineering, Vol. 39, No. 1, pp. 249-259, https://doi.org/10.1007/s10439-010-0165-5.

  74. Siewiorek, G.M.* and Finol, E.A., 2010, “Computational modeling of distal protection filters,” Journal of Endovascular Therapy, Vol. 17, No. 6, pp. 777-788. https://doi.org/10.1583/10-3178.1.

  75. Shum, J.*, Di Martino, E.S., Goldhammer, A.*, Goldman, D.*, Acker, L., Patel, G.*, Ng, J.H.*, Martufi, G.*, and Finol, E.A., 2010, “Semi-automatic vessel wall detection and quantification of wall thickness in computed tomography images of human abdominal aortic aneurysms,” Medical Physics, Vol. 37, No. 2, pp. 638-648. https://doi.org/10.1118/1.3284976.

  76. Siewiorek, G.M.*, Wholey, M.H, and Finol, E.A., 2009, “In vitro performance assessment of distal protection filters: pulsatile flow conditions,” Journal of Endovascular Therapy, Vol. 16, No. 6, pp. 735-743. https://doi.org/10.1583/09-2874.1.

  77. Rodriguez, J.F., Martufi, G.*, Doblare, M., and Finol, E.A., 2009, “The effect of material model formulation in the stress analysis of abdominal aortic aneurysms,” Annals of Biomedical Engineering, Vol. 37, No. 11, pp. 2218-2221. https://doi.org/10.1007/s10439-009-9767-1.

  78. Martufi, G.*, Di Martino, E.S., Amon, C.H., Muluk, S.C., and Finol, E.A., 2009, “Three-dimensional geometrical characterization of abdominal aortic aneurysms: image-based wall thickness distribution,” Journal of Biomechanical Engineering, Vol. 131, No. 6, 061015 {11 pages}. https://doi.org/10.1115/1.3127256.

  79. Siewiorek, G.M.*, Finol, E.A., and Wholey, M.H., 2009, “Clinical significance and technical assessment of stent cell geometry in carotid artery stenting,” Journal of Endovascular Therapy, Vol. 16, No. 2, pp. 178-188. https://doi.org/10.1583/08-2583.1.

  80. Siewiorek, G.M.*, Wholey, M.H, and Finol, E.A., 2008, “Vascular resistance in the carotid artery: an in vitro investigation of embolic protection filters,” Journal of Vascular and Interventional Radiology, Vol. 19, No. 10, pp. 1467-1476. https://doi.org/10.1016/j.jvir.2008.07.007.

  81. Scotti, C.M.*, Jimenez, J.*, Muluk, S.C., and Finol, E.A., 2008, “Wall stress and flow dynamics in abdominal aortic aneurysms: finite element analysis vs. fluid-structure interaction,” Computer Methods in Biomechanics and Biomedical Engineering, Vol. 11, No. 3, pp. 301-322. https://doi.org/10.1080/10255840701827412.

  82. Siewiorek, G.M.*, Eskandari, M.K., and Finol, E.A., 2008, “The AngioguardTM embolic protection device,” Expert Review of Medical Devices, Vol. 5, No. 3, pp. 287-296. https://doi.org/10.1586/17434440.5.3.287.

  83. Finol, E.A., Siewiorek, G.M.*, Scotti, C.M.*, Wholey, M.H, and Wholey, M.H., 2008, “Wall apposition assessment and performance comparison of distal protection filters,” Journal of Endovascular Therapy, Vol. 15, No. 2, pp. 177-185. https://doi.org/10.1583/07-2272.1.

  84. Siewiorek, G.M.*, Wholey, M.H, and Finol, E.A., 2007, “In vitro performance assessment of distal protection devices for carotid artery stenting: effect of physiologic anatomy on vascular resistance,” Journal of Endovascular Therapy, Vol. 14, No. 5, pp. 712–724. https://doi.org/10.1177/152660280701400517.

  85. Scotti, C.M.* and Finol, E.A., 2007, “Compliant biomechanics of abdominal aortic aneurysms: a fluid-structure interaction study,” Computers and Structures, Vol. 85, Nos. 11-14, pp. 1097-1113. https://doi.org/10.1016/j.compstruc.2006.08.041.

  86. Valencia, A., Guzman, A., Finol, E.A., and Amon, C.H., 2006, “Blood flow in saccular aneurysm models of the basilar artery,” Journal of Biomechanical Engineering, Vol. 128, No. 4, pp. 516-526. https://doi.org/10.1115 /1.2205377.

  87. Scotti, C.M.*, Shkolnik, A.D.*, Muluk, S.C., and Finol, E.A., 2005, “Fluid-structure interaction in abdominal aortic aneurysms: Effects of asymmetry and wall thickness,” Biomedical Engineering OnLine, Vol. 4, Article No. 64 {22 pages}. https://doi.org/10.1186/1475-925X-4-64.

  88. Finol, E.A., Keyhani, K., and Amon, C.H., 2003, “The effect of asymmetry in abdominal aortic aneurysms under physiologically realistic pulsatile flow conditions,” Journal of Biomechanical Engineering, Vol. 125, No. 2, pp. 207-217. https://doi.org/10.1115/1.1543991.

  89. Finol, E.A. and Amon, C.H., 2003, “Flow dynamics in anatomical models of abdominal aortic aneurysms: Computational analysis of pulsatile flow,” Acta Científica Venezolana, Vol. 54, No.1, pp. 43-49.

  90. Finol, E.A. and Amon, C.H., 2002, “Flow-induced wall shear stress in abdominal aortic aneurysms: Part II - pulsatile flow hemodynamics,” Computer Methods in Biomechanics and Biomedical Engineering, Vol. 5, No. 4, pp. 319-328. https://doi.org/10.1080/1025584021000009751.

  91. Finol, E.A. and Amon, C.H., 2002, “Flow-induced wall shear stress in abdominal aortic aneurysms: Part I - steady flow hemodynamics,” Computer Methods in Biomechanics and Biomedical Engineering, Vol. 5, No. 4, pp. 309-318. https://doi.org/10.1080/1025584021000009742.

  92. Finol, E.A. and Amon, C.H., 2001, “Blood flow in abdominal aortic aneurysms: Pulsatile flow hemodynamics,” Journal of Biomechanical Engineering, Vol. 123, No. 5, pp. 474-484. https://doi.org/10.1115/ 1.1395573.

​

bottom of page